WARNING: This product contains nicotine derived from tobacco. Nicotine is an addictive chemical.

Hohm School 2 Lane Charger

Specs

  •  BLD1 System – Automates charge amplification & reduction on li-ion cells
  • 0V2 Activation – among lowest Volt Recognition points ever to ensure low charge cells get back to where they ought to be (4.2V)
  •  Input-Power Autonomous Regulator integration (no more stressing USB power adapters or ports)
  •  Compatible with ALL li-ion cells from as short as 30mm to as long as 71mm
  • LED indicator that reports color and blink variation for quick/easy readout
  •  PCB/PCM3 compatible so even protected cells aren’t left out in the cold
  •  Protection 101: A] over charge; B] short-circuit; C] wrong battery type detection; D] reverse polarity

Features

Hohm Tech has done it again…making tech simple, reliable, and top-tier performing in an all-in-one charger. Introducing the Hohm School 2 Battery Charger, with a full autonomous input/output power regulation, meaning it will back power off if the USB adapter is either suffering from voltage loss or showing characteristics of instability. In short, it’s fully automatic, no more guessing! Another key feature for the techies; it has battery length detection so it reduces charge speed on batteries shorter than 62mm, meaning it protects even the small lithium cells from charging faster than they are meant to be charged.

  1. Microprocessor controlled. Charger can handle 1A charging per slot.
  2. 500mA and 1000mA charge rate is auto selected by battery length.
  3. LED Indicator defines if battery is charging, charged, or has an error.
  4. USB powered. Can be charged with notebook, power bank, phone USB power adapter. All USB 5V / 1A or greater is acceptable power. To achieve full charging capabilities, use USB 5V / 2.1A or greater.
  5. 0V activation features include: over-charge, short-circuit protection, incorrect battery type detection, and reverse charging protection.
  6. Safe for li-ion cells equipped with PCB / PCM (protective circuit board / module)
  7. Protection features include: over-charge, short-circuit protection, incorrect battery type detection, and reverse charging protection.
  8. It can charge li-ion batteries up to 71mm length and battery with PCB.

What's Included

  • 1x 2 Lane Charging Box
  • 1x USB Charging Cable
  • 1x Instruction Card